The wait is finally over. The most versatile and powerful multi-chemistry charger in the market is now underways and expected to arrive at the EU warehouse at January 20th – around the same date in the other major markets, too.
Sporting two displays for better overview, 2 identical output ports, each backed by 500W of raw charging power, integrated 7S balancers, USB connection, free software and much more we do not think you can find more value for money anywhere.
Have a look for yourself – order online today and receive your order before February 1st.
In this video, we provide a quick look at the new EOS 1420i NET3 charger – 14S, 20A @ 550W provided you have a 24-28V power supply. Of course, the 1420 can also run on 12V but the efficiency is lower and so is the power.
Seit kurzer Zeit versinkt Norddeutschland im Schneechaos, was ein super Grund dafür ist voll in die Indoorsaison einzusteigen.
Aus einer Spontanidee heraus entstanden diese beiden Yak 55SP angelehnt an unsere Yak 55Sp 25e.
‘‘‘North Germany is covered with a big layer of Snow. That was the reason to welcome the Indoorseason in Kiel with our Yak 55 SP like the Hyperion 25e Yak 55 SP. The planes are flying pretty well. Check out the components we are using!”’
The Models are equipped with Hyperion Components.
Motor: 1705-11 (17 gr)
Regler: ATLAS 12A
Prop: 8 x 4.3
Lipo: G3 CX 2S 240 mAh
Servos: DS09 SCD
Spectrum 2 gr Empfänger.
During my time in Copenhagen in my capacity as the new Über Test Pilot I’ve been testing the Sniper X II EPP foamie a lot. My goal was to find MY favourite setup for this model. We played around with different motors, props and controllers – this is what I ended up with:
Zs 3009 – 20
ATLAS 35A LBEC
G3 CX 1600 3S
4x Atlas DS 11
In this setup the plane has plenty of power and makes a very nice performance!
Come to help us celebrate Modellbau Lindinger’s new facilities in Austria this coming weekend. Our top fixed-wing pilot Max Ebert is along to show fly a range of the Hyperion models and we are at your full disposal for sharing knowledge about setup, configurations or tips and tricks.
If you do not plan to come we highly recommend that you follow us on Twitter as we will be sending you small news from the event while it takes place.
For the first time, Hyperion Europe is exhibiting in Nürnberg in 2010. For the past 5 years we have focused on showing our products to the consumers at end users shows and flying days across Europe – and this will not change. Already in March we again welcome our user on our booth in Karlsruhe.
Back to Nürnberg – if you are a dealer and would like to meet us there, please come by our booth which is located in Hall 11.1 booth number NEC53. It is a walk from Hall 7A of 6-8 minutes.